+44 130 677 0855
Email
+44 130 677 0855
Email
+44 130 677 0855
Email
The delivery price is calculated during checkout based on your location and the goods ordered. Our basic delivery prices are:
Delivery within India: $82.00
Delivery Service: Five working days*
* For products that are in stock and the order received by midday.
Some products go through a final configuration and calibration before being shipped. If the calibration labs are busy this can add up to two days on to the delivery schedule but guarantees a fresh calibration.
The LiveNoise LN2-SE noise monitor mounts on a wall and just needs power (adapter included) and access to a WiFi or Ethernet wired network. It communicates with our cloud server to provide a real-time display of noise levels and long term noise reports. It uses a data efficient method so the bandwidth use is minimal. You won't notice these units on your network.
You can view the live sound level at each noise monitor or you can view long-term reports over daily, weekly, monthly or custom periods. This is all done from a web browser after logging in to your LiveNoise account.
As the measurements are on a cloud server there is no software to install on your computer. You can access the live sound levels and the long term reports from anywhere using a web browser.
The LN2-SE noise monitor mounts with four screws that are accessible from the front of the case with the font panel removed.
The type of fixing to use depends on what the monitor is being mounted to - screws for wood, plugs and screws for brick.
The noise monitor is lightweight and so does not need a strong structural mount.
The noise monitor comes with a 10 m (32 ft) power cable fitted through a weatherproof gland. This cable can be removed and shortened if necessary. A 24VDC power adapter is included with each noise monitor. The extension cable connects to the power adapter, which must be mounted indoors or in its own weatherproof enclosure.
The LN2-SE LiveNoise Terminal communicates with our cloud server over your existing network. It sends the noise measurements every minute so you can produce up to date reports. If anybody on the account is viewing live data then it also sends the sound levels every second. It uses a data efficient method so the bandwidth use is minimal. You won't notice these units on your network.
As the measurements are on a cloud server there is no software to install on your computer. You can access the live sound levels and the long term reports from anywhere using a web browser.
If a reliable WiFi signal is available then all the noise monitor needs is the network name and password to connect up. If you prefer a wired approach then connection can be made via an Ethernet connection (RJ45). This is a weatherproof socket and for outdoor use you will need a suitable weatherproof cable or weatherproof RJ45 cable housing. For indoor use a standard RJ45 network cable can be used.
To view the live sound levels from any connected noise monitors you use your web browser to log in to your LiveNoise account.
You will be presented with the sound level at each location, updating every second and displayed as numbers, charts or a mixture of the two.
The background is a simple image (JPG format), which you can upload to your account. It can be a picture of the location, floor plan, satellite image, whatever you choose. Alternatively, you can ignore the background and just have the sound level or chart as a large, full-screen display.
If you have alarm trigger levels set up then the chart or numbers will indicate a warning level in yellow and an alarm level in red. If the level stays above the alarm level for the preset period of time then the window will flash red to attract attention.
Each remote noise monitor calculates the usual noise parameters over periods of 5, 10, 15, 30 and 60 minutes. These measurements are sent to the cloud server as soon as they are available so you can create noise reports using a web browser.
Your noise reports can be daily, weekly, monthly or over any custom period you choose. The reports show the sound levels in a chart or in a table.
The reports include many parameters, measured with both "A" and "C" frequency weightings and, where applicable, Fast and Slow time response. This includes the Leq (average sound level), Lmin and Lmax, as well as the statistical parameters L5, L10, L50, L90, L95 and L99. The charts also indicate the number of alarms detected in each period.
To generate a report you select which noise monitors you want to include, the time period you want to see (daily, weekly, monthly or custom) and the measurement period to use (5, 10, 15, 30 or 60 minutes). Your choices are remembered so you don't have to select everything each time.
You can leave the report on-screen and it will update automatically whenever new measurements are available.
The reports you generate in your browser can be exported to PDF or CSV files. A PDF export is useful for printing, emailing or just for your records. The CSV export produces a table of results that can be imported to a spreadsheet or other similar program.
| Acoustic Standards | IEC 61672-2:2002 Class 2 |
| ANSI S1.4 Type 2 | |
| Frequency Range | 20 Hz to 20 kHz |
| Measuring Range | 30 to 120 dB |
| Deviation | ± 0.5 dB |
| Frequency Weighting | "A" and "C" |
| Time Weighting | Fast and Slow |
| Measurements | LAeq, LCeq, |
| LAFmin, LAFmax, LASmin, LASmax, | |
| LCFmin, LCFmax, LCSmin, LCSmax | |
| L5, L10, L50, L90, L95, L99 (A and C, Fast and Slow) | |
| over periods 5, 10, 15, 30 and 60 minutes | |
| Noise profile: LAeq and LCeq every second | |
| Outputs | 0-10 V (factory option) 4-20 mA (factory option) |
| USB Port | For USB memory stick configuration |
| Ethernet Port | Weatherproof RJ45 socket |
| Internal Memory | 16 GB for up to 3 years storage |
| Cabinet | Polypropylene |
| Weather Protection | IP65 |
| Dimensions | 150 x 260 x 75 mm |
| 5.9" x 10.2" x 2.95" | |
| Weight | 1.1 kg |
| 2lb 7oz | |
| Power | 24VDC, max 12W (power adapter included) |
Review count: 1. Average rating: 5.0
★★★★★ 5 star rating
Verified NoiseMeters customer, Mon Dec 20 2021
We purchased this product for remote external 24hr sound monitoring of a site. Product connected easily to wifi and continual cloud uploads of data can be accessed from anywhere via a web browser. Records second by second data. Would definitely recommend.
Vertex Investments
We only publish reviews provided by verified customers, who have purchased the product that is shown on this page. This ensures that the review is genuine and provided for the product listed. These reviews are for the LiveNoise LN2-SE Noise Monitor with Ethernet & WiFi.
Please note that these are all product reviews and so should give you an impression of the quality of the product and how well it carries out its intended functions.
If you would like to provide a review for the "LiveNoise LN2-SE Noise Monitor with Ethernet & WiFi" then please email us on info@noisemeters.com and we will send you the product review link.
Cart)
)
)
)
)
)
)
)
)
)
